Configuring Call Routing
Another way to route incoming calls (deprecated)
The following commands create a
admin> new
admin> set
admin> write
This profile creates a
device | # | source | type | tg | sa | phone |
1:04:01/1 | 0 | 0:00:00/0 | 4 | 0 |
|
When the system receives an
Dedicating Series56 cards to modem processing
The Series56 II and Series56 III cards handle both modem and digital calls. The TAOS unit automatically creates two
If you want the card to answer only modem calls, delete the
Enabling Series56 cards to handle HDLC processing
If you want Series56 II and Series56 III cards to answer HDLC calls, then no matter where you install the card, you might experience delays as it tries to answer single channel nailed Frame Relay calls.
To reduce such delays, install a Hybrid Access (HDLC) card in a
Another way to route incoming calls (deprecated)
Many network line profiles provide a parameter for directing incoming calls to a particular host interface. Following are the relevant parameters, shown with default settings:
[in T1/{
[in E1/{
APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide |
