Lucent Technologies 7820-0802-003 manual Sample Adsl nailed PPP connection, Name=idsl-fr

Configuring DSL Connections (DSLTNT)

Sample DSL configurations

–Name=idsl-fr

–Active=Yes

–Call Type=Nailed

–Nailed Grp=1

3Exit the Frame Relay profile and save your changes.

Note that the Pipeline uses the following nailed group numbers:

•1 is the first B channel

•2 is the second B channel

Configuring the Connection profile

You must configure other, specialized options in the Connection profile for the DSLTNT, including the name of the Frame Relay profile and the nailed group assigned to it. To do this, proceed as in the following example:

1Open Ethernet > Connections > idsltnt

2Specify Frame Relay encapsulation:

Encaps=FR

3Open the Encaps Options submenu.

4Specify name of the Frame Relay profile used by this connection and a DLCI.

–FR Prof=idsl-fr

–DLCI=16

5Exit and save the Connection profile.

Sample ADSL nailed PPP connection

In Figure 17-4,a DSLPipe connects to a DSLTNT ADSL card over a nailed PPP connection. The ADSL card is in slot 7, and the DSLPipe is connected to port 3 of the ADSL card. The DSLPipe IP address is 10.10.73.1/24. The DSLTNT IP address is 104.178.115.163/24. This example uses ADSL, but you can configure an SDSL connection similarly.

Figure 17-4. Sample ADSL PPP connection

		MAX TNT system IP adress
	104.178.115.163/24			10.10.73.1/24	10.10.73.2/24
			Nailed PPP
				CPE (DSLPipe)
COE (MAX TNT)

17-26 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide