Lantronix SLSLP400PS201 manual Bind Password, Authentication Port, Timeout

	8: User Accounts
Field	Description
Bind Name	The name for a non-anonymous bind to an LDAP server. This item has the
	same format as LDAP Base. One example is
	cn=administrator,cn=Users,dc=domain,dc=com.
Bind Password and	Password for a non-anonymous bind. This entry is optional. Acceptable
Confirm Password	characters are a-z, A-Z,and 0-9.
	The maximum length is 127 characters.

RADIUS

When RADIUS is selected, the Spider device communicates with a RADIUS server for user authentication. To access a Spider device set up for RADIUS, log in with a name and password. The Spider device contacts the RADIUS server for authentication and, if approved, the Spider device uses the locally stored user profile. If there is no such profile, access via RADIUS will be refused.

Field	Description
Server	Enter the name or IP address of the RADIUS server, reachable over the
	network by the Spider device, containing the user database. Configure a
	DNS server if a name rather than an address is used.
Shared Secret	A shared secret is a text string that serves as a password between the
	RADIUS client and RADIUS server. In this case the Spider device acts as a
	RADIUS client. A shared secret is used to verify that RADIUS messages are
	sent by a RADIUS-enabled device that is configured with the same shared
	secret and to verify that the RADIUS message has not been modified in
	transit (message integrity).
	Enter a maximum of 128 alphanumeric characters and symbols such as an
	exclamation point (“!”) or an asterisk (“*”).
Authentication Port	The port the RADIUS server listens for authentication requests. The default
	value is 1812.
Accounting Port	The port the RADIUS server listens for accounting requests. The default
	value is 1813.
Timeout	Sets the request time-to-live in seconds. The time-to-live is the time to wait
	for the completion of the authentication request. If the request job is not
	completed within this interval of time it is cancelled. The default value is 1
	second.
Retries	Sets the number of retries if a request could not be completed. The default
	value is 3 times.

1.Do one of the following:

a.Click Save to save settings.

b.Click Reset to Defaults to restore system defaults.

c.Click Reset to restore original settings.

Spider™ and SpiderDuo® KVM-over-IP Device User Guide 82