Lantronix SLSLP400PS201 manual Transmission Encoding, KVM Console Type, KVM Console Deployment

	7: Interfaces
Transmission Encoding
Field	Description
Automatic Detection	This option uses an algorithm to try to determine what sort of connection is
	being used, and sets up parameters to match. These settings may change
	from login to login depending on the state of the network at that point.
Preconfigured	Establishes a set of parameters optimized for each of a number of
	connection types. The default transmission encoding is LAN (high color),
	which is uncompressed with a 16 bit color depth. Other data networks may
	be chosen from the Network speed drop-down list, and the compression
	and color depth will be configured accordingly.
Manual	Allows the direct control of the compression factor and color depth. The
	simplest way to reduce bandwidth is to cut the color depth down to 8 bits;
	subtle color shades will be gone but the overall image is very usable. Dialing
	up the compression level also makes available even further reductions in
	color depth, all the way down to black and white (1 bit.) As compression level
	increases and/or color depth decreases, image quality and responsiveness
	to changes deteriorates but required bandwidth is reduced.
KVM Console Type
Field	Description
Default Java VM	Select this option to use Java on the client system launching the applet. If no
	Java environment is installed, the console window will not launch. The
	default is enabled.
Sun Microsystems Java	Force the system to use the platform-independent Sun version instead when
Browser Plugin	launching the Remote Console applet.

Note: Users have two ways to deploy the Remote Console program. Both provide the same functionality and differ only in deployment method. The default is Java Web Start. Applet deployment is available in case the user cannot connect via Java Web Start. This usually should not happen unless the user has a special proxy server or firewall that blocks Java Web Start.

KVM Console Deployment

Field	Description
Java Web Start	Select this option to use Java Web Start deployment method.
Applet	Select this option to use the Applet deployment method.
Miscellaneous KVM Console Settings
Field	Description
Start in Monitor Mode	Results in the Remote Console window being view-only when launched for
	this user. This may be changed to interactive mode from within the Remote
	Console window, if the user has appropriate permission.

Spider™ and SpiderDuo® KVM-over-IP Device User Guide 63