Appendix E: PCU Safety Information
Please follow the safety precautions described below when installing and operating the PCU.
Cover
Do not remove the cover of the PCU. There are no
Refer all servicing to Lantronix.
Power Plug
When disconnecting the power cable from the socket, pull on the plug, not the cord.
Always connect the power cord to a properly wired and grounded power source. Do not use adapter plugs or remove the grounding prong from the cord.
Only use a power cord with a voltage and current rating greater than the voltage and current rating marked on the unit.
Install the unit near an AC outlet that is easily accessible.
Always connect any equipment used with the product to properly wired and grounded power sources.
To help protect the product from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS) connected between the AC power source and PCU.
Do not connect or disconnect this product during an electrical storm.
Input Supply
Check nameplate ratings to assure there is no overloading of supply circuits that could affect overcurrent protection and supply wiring.
Warning: To avoid electrical shock always disconnect the AC power cords to the PCU before servicing.
Grounding
Maintain reliable grounding of this product.
Pay particular attention to supply connections when connecting to power strips, rather than directly to the branch circuit.
Fuses
For protection against fire, replace the
Spider™ and SpiderDuo® | 130 |
