
7: Interfaces
Figure 7-1 Spider Network Settings Web Page
2. Modify the following fields.
Network Basic Settings
Field | Description |
|
|
IP auto configuration | Select DHCP or BOOTP to fetch network settings from the appropriate type |
| of server. Select NONE for a fixed IP address. |
|
|
Host name | DHCP servers can register a name for this Spider device to assist in finding |
| it, or you can configure it with a short host name or a fully qualified |
| domain name. |
|
|
IP address | If you are using a fixed IP address, enter it in the usual dot notation. |
|
|
Subnet Mask | If you are using a fixed IP address, enter the subnet mask of the local |
| network. |
|
|
Gateway IP address | If the Spider device is to be accessible from outside the local subnet, enter |
(optional) | the IP address of the router providing access. |
|
|
Primary DNS Server IP | For name resolution, enter the IP address of the primary Domain Name |
Address (optional) | Server. This is optional, but needed if names rather than static IP addresses |
| are used for certain Spider device functions requiring network connections. |
|
|
Spider™ and SpiderDuo® | 57 |