Lantronix SLSLP400PS201 manual Enable Snmp Agent, Use SNMPv3, Use SNMPv1, Public, Is private

9: Services

Figure 9-6 SNMP Settings Page

2. Modify the following fields.

Field	Description
Enable SNMP Agent	Click the checkbox to enable the Spider device SNMP agent, and enter the
	system location and the contact name for the system.
Use SNMPv3	Select to use SNMPv3 (rather than SNMPv1)and enter the following:
	 DES Encryption: Select whether to turn off or enable encryption with
	Data Encryption Standard (DES),
	 Read Username: User ID for a user with read-only authority to use to
	access SNMP v3.
	 Read Password: Password for a user with read-only authority to use to
	access SNMP v3. Up to 32 characters.
	 Write Username: Enter a user ID for users with read-write authority. Up to
	32 characters.
	 Write Password: Enter a password for the user with read-write authority
	to use to access SNMP v3. Up to 20 characters.
Use SNMPv1	Select to use SNMPv1 (rather than SNMPv3) and enter the following:
	 Read Community: Enter the SNMP read community name. The default is
	public.
	 Write Community: Enter the SNMP write community name. The default
	is private.

3.Do one of the following:

a.Click Save to save settings.

b.Click Reset to Defaults to restore system defaults.

c.Click Reset to restore original settings.

Spider™ and SpiderDuo® KVM-over-IP Device User Guide 91