Lantronix SLSLP400PS201 manual Drive Redirection Window

7: Interfaces

Figure 7-10 Drive Redirection Window

Figure 7-11 Drive Redirect Buttons

3.Click the Connect Drive button at the top of the page. The Select a drive to redirect dialog box opens.

Figure 7-12 Select Drive Redirect Window

4. From the drop-down list, select the drive you want to redirect.

Note: To refresh the list after adding or removing a drive, click the Refresh List button.

5.If desired, select the Enable Write support check box.

6.Click OK. Depending on your selections, the following events or warnings display:

7.If you select Enable Write support, the following warning displays:

Figure 7-13 Enable Write Support Window

Because of the danger of destroying all data on the drive, click Yes only if you are certain of what you are doing. If you select the hard disk from the drop-down list, the following warning may display:

Spider™ and SpiderDuo® KVM-over-IP Device User Guide 74