TC63 AT Command Set

13.7 AT+CMGS

s

At baudrates lower than 19200 it is recommended to use the line termination character only (refer to <n> of ATS3, default <CR>) before entering text or PDU. Use of the line termination character followed by the response formatting character (see <n> of ATS4, default <LF>) can cause problems.

TC63_ATC_V00.490

Page 332 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 332
Image 332
Siemens manual TC63 AT Command Set