TC63 AT Command Set
21.9 Alphabetical List of AT Commands s
TC63_ATC_V00.490 Page 501 of 501 5/24/05
Confidential / Draft - Do not copy
ATD><str> Mobile originated call from active memory using corre-
sponding field
Section 7.6, page 147
ATDI Mobile originated call to ISDN number Section 7.7, page148
ATDL Redial last number used Section 7.8, page 149
ATE Enable command echo Section 4.5, page93
ATH Disconnect existing connection Section 7.9, page 150
ATH Manual rejection of a network request for PDP context
activation
Section 11.20, page 306
ATI Display product identification information Section 6.1, page 134
ATL Set monitor speaker loudness Section 18.2, page 412
ATM Set monitor speaker mode Section 18.3, page 412
ATO Switch from command mode to data mode / PPP online
mode
Section 7.17, page 159
ATP Select pulse dialing Section 7.29, page 178
ATQ Set result code presentation mode Section 2.4, page 35
ATS0 Set number of rings before automatically answering a call Section 7.12, page 154
ATS0 Automatic response to a network request for PDP context
activation
Section 11.21, page 307
ATS10 Set disconnect delay after indicating the absence of data
carrier
Section 7.16, page 158
ATS18 Extended call release report Section 3.5, page 85
ATS3 Set command line termination character Section 20.2, page 458
ATS4 Set response formatting character Section 20.3, page 459
ATS5 Write command line editing character Section 20.4, page 460
ATS6 Set pause before blind dialing Section 7.13, page 155
ATS7 Set number of seconds to wait for connection completion Section 7.14, page 156
ATS8 Set number of seconds to wait for comma dialing modifier Section 7.15, page 157
ATT Select tone dialing Section 7.30, page178
ATV Set result code format mode Section 2.5, page 36
ATX Set CONNECT result code format and call monitoring Section 2.6, page 37
ATZ Set all current parameters to user defined profile Section 2.8, page 39
AT Command Description Section and Page