Siemens TC63 Atsmong Cell Info Table, Gprs Monitor, Bcch Pbcch PAT MCC MNC NOM RAC, # Cell #

TC63 AT Command Set

8.10 AT^SMONG

s

Note

•For compatibility with earlier products and to support legacy applications, often any input character will stop the periodic output of the write command. But since this applies only in certain cases (depending on the set- tings of AT+IPR and AT+CMUX), it is recommended to always use "at" or "AT".

8.10.1AT^SMONG Cell Info Table

Example output for AT^SMONG:

GPRS Monitor
BCCH	G	PBCCH	PAT		MCC	MNC	NOM	TA	RAC	# Cell #
0637	1	-	4		234	05	2	00	0B
Columns of the cell info table:
Column				Description
BCCH				ARFCN of BCCH carrier
G				GPRS status:

0GPRS not available in currently used cell

1GPRS available in currently used cell

2GPRS attached

Note: During a voice call or CSD connection, GPRS services are not available, and con- sequently G=0 is displayed.

PBCCH	If PBCCH is present, indication of ARFCN, else ''-'' or if Frequency Hopping is used ''H''
PAT	Priority Access Threshold (GSM Rec. 04.08 / 10.5.2.37b)
	0	Packet access is not allowed in the cell
	1	Spare, shall be interpreted as "000" (packet access not allowed)
	2	Spare, shall be interpreted as "000" (packet access not allowed)
	3	Packet access is allowed for priority level 1
	4	Packet access is allowed for priority level 1 to 2
MCC	Mobile Country Code
MNC	Mobile Network Code
NOM	Network Operation Mode (1...3)
TA	Timing Advance Value
RAC	Routing Area Code (as hexadecimal value)

TC63_ATC_V00.490	Page 199 of 501	5/24/05
Confidential / Draft - Do not copy