TC63 AT Command Set
7.24 AT+CRC s
TC63_ATC_V00.490 Page 173 of 501 5/24/05
Confidential / Draft - Do not copy
7.24 AT+CRC Set Cellular Result Codes for incoming call indication
The AT+CRC command controls whether or not to use the extended format of incoming call indication.
<mode>=1 may lead to connection failure, if the application (e.g. WinFax) waits for the default URC.
Syntax
Unsolicited Result Codes
URC 1
RING
Indicates incoming call to the TE if <mode>=0.
URC 2
+CRING: <type>
Indicates incoming call to the TE if <mode>=1.
Parameter Description
[0](&F) Disable extended format
1 Enable extended format
“REL ASYNC“ Asynchronous non-transparent
“FAX“ Facsimile
“VOICE“ Voice
“GPRS“ <PDP_type>, <PDP_addr> [,[<L2P>][,<APN>]] GPRS network request for
PDP context activation
Test Command
AT+CRC=?
Response(s)
+CRC: (list of supported<mode>s)
OK
ERROR
Read Command
AT+CRC?
Response(s)
+CRC: <mode>
OK
ERROR
Write Command
AT+CRC=[<mode>]
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
GSM 07.07 ! % % % % % % ! % !
<mode>(num)(&W)(&V)
<type>(str)