Siemens TC63 manual 11 AT+COLP Connected Line Identification Presentation, At+Colp=?, At+Colp?

TC63 AT Command Set

9.11 AT+COLP

s

9.11AT+COLP Connected Line Identification Presentation

This command refers to the GSM supplementary service COLP (Connected Line Identification Presentation) that enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the execution of the supplementary service COLR in the network.

Syntax

Test Command

AT+COLP=?

Response(s)

+COLP:(list of supported <n>s)

OK

Read Command

AT+COLP?

Response(s)

+COLP: <n>, <m>

OK ERROR

+CME ERROR: <err>

Write Command

AT+COLP=[<n>]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! ! !

Unsolicited Result Code

Call response format:

+COLP: <number>, <type>

Parameter Description

<n>(num)

0	Disable - suppress unsolicited result codes
1	Enable - display unsolicited result codes
<m>(num)
0	COLP not provisioned (no presentation)
1	COLP provisioned
2	Unknown

<number>(str)

String type phone number of connected address in format specified by <type>

TC63_ATC_V00.490	Page 227 of 501	5/24/05
Confidential / Draft - Do not copy