TC63 AT Command Set

1.3 Document conventions

s

1.3.2Superscript notation for parameters and values

Table 1.1: Symbols used to mark the type of parameters

Parameter type

Meaning

<param>(num)

Parameter value must be numeric type

<param>(str)

Parameter value must be string type

Table 1.2:

Symbols used to indicate the correlations with other commands

 

 

Parameter option

Meaning

<param>(&W)

Parameter value will be stored with AT&W

<param>(&V)

Parameter value will be displayed with AT&V

<param>(ˆSNFW)

Parameter value will be stored with AT^SNFW

<param>(+CSCS)

Parameter value has to be (is) coded according to current setting of <chset> (see

 

 

AT+CSCS for details)

Table 1.3:

Symbols used to mark different types of default values of parameters

 

 

Value option

Meaning

[x]

 

Default value: if the parameter is omitted, the value 'x' will be assumed

x(&F)

 

Factory default value, will be restored to 'x' with AT&F

x(P)

 

Powerup default value of a parameter which is not stored at power down

x(D)

 

Delivery default value of a parameter which cannot be restored automatically

TC63_ATC_V00.490

Page 17 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 17
Image 17
Siemens TC63 manual Superscript notation for parameters and values