Siemens TC63 manual ParmTag, Alphabet, ARate, DataType, Mode

TC63 AT Command Set

10.1 AT^SICS

s

Write Command (Continued)

AT^SICS=<conProfileId>, <conParmTag>, <conParmValue>

Response(s)

ERROR

+CME ERROR: <err>

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<conProfileId>(num)

Internet connection profile identifier.

The <conProfileId> identifies all parameters of a connection profile, and, when a service profile is created with AT^SISS the <conProfileId> needs to be set as "conId" value of the AT^SISS parameter <srv-

ParmTag>.

0...5

<conParmTag>(str)

	Internet connection parameter.
	“conType“	Type of Internet connection.
		For supported values of <conParmValue> refer to <conParmValue-con-
		Type>.
	“alphabet“	Selects the character set for input and output of string parameters within a pro-
		file.
		The selected value is bound to the specific profile. This means that different
		profiles may use different alphabets. Unlike other parameters the alphabet can
		be changed no matter whether the <conParmTag> value "conType" has been
		set.
		For supported values of <conParmValue> refer to <conParmValue-
		alphabet>.
	“user“	User name string: maximum 32 characters (where "" is default).
	“passwd“	Password string: maximum 32 characters (where "" is default).
		If <conParmValue-authMode>is "MsChapV1" then the maximum password
		length is 16 characters.
	“apn“	Access point name string value: maximum 100 characters (where "" is default).
	“inactTO“	Inactivity timeout value in seconds: 0
		Changing the value is not allowed (if changed the value will be reset to 0).
	“calledNum“	Called BCD number.
	“dataRate“	Data rate.
		For supported values of <conParmValue> refer to <conParmValue-dat-
		aRate>.
	“dataType“	Data call type.
		For supported values of <conParmValue> refer to <conParmValue-
		dataType>.
	“authMode“	Authentication mode.
		For supported values of <conParmValue> refer to <conParmValue-auth-
		Mode>.
	“dns1“	Primary DNS server address (IP address in dotted-four-byte format).
		This value determines whether to use the DNS server addresses dynamically
		assigned by the network or a specific DNS server address given by the user.
		"dns1" = "0.0.0.0" (default) means that the CSD or GPRS connection profile
TC63_ATC_V00.490		Page 238 of 501	5/24/05
Confidential / Draft - Do not copy