TC63 AT Command Set

15.1 AT^SRSA

s

15.1AT^SRSA Remote SIM Access Activation

Syntax

Test Command

AT^SRSA=?

Response(s)

^SRSA:(list of supported <devId>s) , (list of supported <sapRole>s) , (list of supported <muxChan>s) , (list of supported <dataForm>s) , (list of supported <beaconPer>s) , (list of supported <discType>s)

OK

Read Command

AT^SRSA?

Response(s)

[^SRSA:<devId>, <sapRole>, <connState>, <muxChan>, <dataForm>, <beaconPer>]

OK

Write Command

AT^SRSA=<devId>, <sapRole>[, <muxChan>[, <dataForm>[, <beaconPer>[, <discType>]]]]

Response(s)

^SRSA:<actResult>

OK

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Unsolicited Result Code

^SRSA: <devId>, <sapRole>, <connState>

This URC is generated if either the SIM usage scheme or the SAP connection status has changed due to SAP message communication or AT command control.

Command Description

The read command can be used to request the current RSA settings. Every line outputs an RSA connection, if any.

The write command allows to control the TC63's SIM usage scheme along with the related configuration param- eters.

Parameter Description

<actResult>(num)

Activation result

 

0

No Error

 

Parameters valid, SAP mode change initiated. However, actual mode change

 

is signaled via URC "^SRSA".

 

Other values indicate invalid activation requests, no SAP mode change is initi-

 

ated in the following cases:

1

Error unspecified.

2

Error activation command is busy.

3

Error activation started with serial multiplex mode is off.

4

Error activation started on invalid serial multiplex channel.

5

Error device Id is already known.

TC63_ATC_V00.490

Page 376 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 376
Image 376
Siemens TC63 manual Atsrsa Remote SIM Access Activation, Atsrsa=?, Atsrsa?