TC63 AT Command Set

13.21 AT^SCMW

s

13.21AT^SCMW Write concatenated SMS messages to memory

Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg- ment of the concatenated message must be identified by the additional parameters <seq>, <ieia> and <ref>. To store all segments of the message one by one, the AT^SCMW write command must be executed for each seg- ment.

Syntax

Test Command

AT^SCMW=?

Response(s)

OK

Write Command

If text mode (see AT+CMGF=1)

AT^SCMW=<oa>/<da>, [<tooa>/<toda>][, <stat>], <seq>, <max>, <ieia>, <ref><CR> Text can be entered. <CTRL-Z>/<ESC>

Response(s)

^SCMW: <index>

OK

If writing fails

ERROR

+CMS ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Command Description

The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT) from TE to memory storage <mem2>. Memory location <index> of the stored message is returned. Message status will be set to 'stored unsent' unless otherwise given in parameter <stat>.

Notes

Command is only available if AT+CMGF=1.

To send or delete a concatenated short message please use the known SMS commands, see AT+CMSS for sending and AT+CMGD for deleting.

See notes provided for AT+CMGW.

TC63_ATC_V00.490

Page 354 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 354
Image 354
Siemens TC63 manual Atscmw Write concatenated SMS messages to memory, Atscmw=?, Scmw index