TC63 AT Command Set

15.3 Related AT Commands

s

15.3.3Bluetooth scenario (SAP)

A connection between a cellular engine operating as a SAP client and an ME that supports Bluetooth and SIM Access profile requires:

a) System requirements

Windows 2000, Windows XP (or later) installed

USB Bluetooth dongle. It is recommended to use the Fujitsu-Siemens product with the "PlugFree" Bluetooth driver. This driver allows connections to Bluetooth profiles which are not yet specified by the SIG, e.g. SAP.

b) Installation procedure

After installing the USB Bluetooth dongle and the "PlugFree" driver software, the Bluetooth profiles are acces- sible via their own virtual COM port.

If the WinMux driver has been installed another three virtual channels (mapped to additional COM ports) are available. The physical Multiplexer COM port is connected to the cellular engine.

Start the Bluetooth connection using the driver provided by the USB Bluetooth dongle.

Through "ComBridge", one virtual COM port supplied by "WinMux" is connected to the SAP COM port of "PlugFree". This establishes an direct communication link between the cellular engine and the cellular phone. However, AT commands can still be entered to the cellular engine via the remaining multiplexer channels.

Select the "ComBridge" SAP filter.

Press the "ComBridge-Start" button to connect both MEs.

Start the SAP client using the AT command "AT^SRSA=2,2,3,1", if multiplexer channel 3 is used.

TC63_ATC_V00.490

Page 385 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 385
Image 385
Siemens TC63 manual Bluetooth scenario SAP