Siemens TC63 manual Atscms Send concatenated SMS messages, Atscms=?

TC63 AT Command Set

13.20 AT^SCMS

s

13.20AT^SCMS Send concatenated SMS messages

Sending a concatenated message is similar to sending a "normal" message, except that each segment of the concatenated message must be identified by the additional parameters <seq>, <ieia> and <ref>. To send all segments of the message one by one, the AT^SCMS write command must be executed for each segment.

Syntax

Test Command

AT^SCMS=?

Response(s)

OK

Write Command

Command syntax for text mode (see AT+CMGF=1):

AT^SCMS=<da>[, <toda>], <seq>, <max>, <ieia>, <ref><CR> Text can be entered <CTRL-Z>/<ESC>

Response(s)

+CMGS: <mr>[, <scts>]

OK

If sending fails

ERROR

+CMS ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! ! !

Command Description

The write command transmits one segment of a concatenated short message from TE to network (SMS-SUB- MIT).

After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes- sage simply enter <CTRL-Z>. After the prompt a timer will be started to observe the input.

To abort sending use <ESC>. Abortion is acknowledged with "OK", though the message will not be sent.

The message reference <mr> is returned to the TE on successful message delivery. The value can be used to identify the message in a delivery status report provided as an unsolicited result code.

Notes

•See notes provided for AT+CMGS.

•Command is only available if AT+CMGF=1.

TC63_ATC_V00.490	Page 353 of 501	5/24/05
Confidential / Draft - Do not copy