Siemens TC63 manual AT+CPIN2 PIN2 Authentication, AT+CPIN2=?, AT+CPIN2?, AT+CPIN2=pin, new pin

TC63 AT Command Set

5.2 AT+CPIN2

s

5.2AT+CPIN2 PIN2 Authentication

AT+CPIN2 controls network authentication of the TC63.

The read command returns an alphanumeric string indicating whether or not network authentication is required. The write command allows the TC63 to store the entered password. This may be for example the SIM PIN2 to benefit from the features listed below, or the SIM PUK2 to replace a disabled PIN2 with a new one. Note that PIN2 can only be entered if PIN1 authentication was done.

If the TC63 is requesting SIM PUK2, use <pin> to enter the PUK2, followed by <new pin> to specify the new PIN2.

Syntax

Test Command

AT+CPIN2=?

Response(s)

OK

Read Command

AT+CPIN2?

Response(s)

+CPIN2: <code>

OK ERROR

+CME ERROR: <err>

Write Command

AT+CPIN2=<pin>[, <new pin>]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Parameter Description

<pin>(str)

Password (string type), usually SIM PIN2 or, if requested, SIM PUK2.

<new pin>(str)

If the requested code was SIM PUK2: new password (PIN2).

See Section 5.1.1, What to do if PIN or password authentication fails? for more information about when you may need to enter the PUK.

<code>(text)

	READY	ME is not pending for any password.
	SIM PIN2	ME is waiting for SIM PIN2.
		This <code> is returned only when PIN2 authentication has not yet been done
		or has failed ("+CME ERROR:17").
	SIM PUK2	ME is waiting for SIM PUK2.
		This <code> is returned only when PIN2 authentication has failed and ME is
		pending for SIM PUK2 (i.e. "+CME ERROR:18").
TC63_ATC_V00.490		Page 112 of 501	5/24/05
Confidential / Draft - Do not copy