Siemens TC63 manual Ascii, Bsp, Null

TC63 AT Command Set

1.5 Supported character sets

s

Table 1.5: Examples for character definitions depending on alphabet

GSM 03.38	GSM character	Corresponding	ASCII	Hex Esc
character	hex. value	ASCII character	Esc sequence	sequence
Ö	5C	\	\5C	5C 35 43
"	22	"	\22	5C 32 32
ò	08	BSP	\08	5C 30 38
@	00	NULL	\00	5C 30 30

CAUTION: Often, the editors of terminal programs do not recognize escape sequences. In this case, an escape sequence will be handled as normal characters. The most common workaround to this problem is to write a script which includes a decimal code instead of an escape sequence. This way you can write, for example, short mes- sages which may contain differently coded characters.

TC63_ATC_V00.490	Page 21 of 501	5/24/05
Confidential / Draft - Do not copy