TC63 AT Command Set

8.2 AT+COPS

s

Read Command

(Continued)

AT+COPS?

Response(s)

ERROR

+CME ERROR: <err>

Write Command

AT+COPS=<mode>[, <format>[, <oper>]]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

§ % % % % % % ! ! !

Parameter Description

<opStatus>(num)

 

Status

 

 

 

0

Unknown

 

 

1

Operator available

 

 

2

Current operator

 

 

3

Operator forbidden

 

 

 

 

 

 

 

 

<oper>(str)

 

 

 

 

Operator

 

 

 

 

If test command: Operator name in long alphanumeric format and numeric format.

 

 

 

If read command: Operator name as per <format>.

 

 

 

If write command: Operator name in numeric format.

 

 

 

 

 

 

 

 

<mode>(num)(&V)

 

 

 

 

Parameter values 0 and 1 are stored non-volatile in the TC63.

 

 

 

0(D)

Automatic mode; <oper> field is ignored.

 

 

1

Manual operator selection

 

 

 

 

Write command requires <oper> in numeric format, i.e. <format> shall be 2.

 

 

Read command returns the current <mode> and the currently selected

 

 

<oper>. If no operator is selected, <format> and <oper> are omitted.

2

Manually deregister from network and remain unregistered until <mode>=0 or

 

 

1 or 4 is selected.

 

 

3

Set only <format> (for AT+COPS read command).

 

 

4

Automatic / manual selection; if manual selection fails,

automatic mode

 

 

(<mode>=0) is entered (<oper> field will be present).

 

 

 

 

 

 

 

 

<format>(num)(&W)(&V)

 

 

 

 

0(&F)

Long alphanumeric format of <oper>. Can be up to 16 characters long.

2

Numeric format of <oper>. This is the GSM Location Area Identification (LAI)

 

 

number, which consists of the 3-digit Mobile Country Code (MCC) plus the 2-

 

 

or 3-digit Mobile Network Code (MNC).

 

 

 

 

 

 

 

TC63_ATC_V00.490

Page 181 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

 

Page 181
Image 181
Siemens TC63 manual AT+COPS=mode, format, oper, OpStatusnum, Operstr