TC63 AT Command Set

12. FAX Commands

s

12.FAX Commands

The following commands can be used for FAX transmission. If the ME is acting as a Fax modem for a PC based application (e.g. "WinFax") it is necessary to select the proper Service Class (Fax Class) provided by the ME. The ME reports its Service Class capabilities, both the current setting and the range of services available. This is provided by the AT+FCLASS command.

Service Classes supported by the ME:

AT+FCLASS Parameter

Service class

Reference, Standard

0

Data modem

e.g. TIA/EIA-602 or ITU V.250

1

Service Class 1

EIA/TIA-578-A

 

 

 

12.1FAX parameters

Parameter Description

<mod>(num)

Modulation mode

 

24

V.27ter - 2400 bps

48

V.27ter - 7200 bps

72

V.29 - 7200 bps

96

V.29 - 9600 bps

Note

Only the default value needs to be implemented. Use the test commands to check which parameter values are really possible.

TC63_ATC_V00.490

Page 311 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 311
Image 311
Siemens TC63 manual FAX Commands, FAX parameters, AT+FCLASS Parameter, EIA/TIA-578-A, Modnum