TC63 AT Command Set

13.25 AT^SMGR

s

13.25AT^SMGR Read SMS message without setting status to REC READ

Syntax

Test Command

AT^SMGR=?

Response(s)

^SMGR:

OK

Write Command

AT^SMGR=<index>

Response(s)

see AT+CMGR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Notes

The AT^SMGR command is a specific Siemens command with the same syntax as AT+CMGR Read SMS mes- sage. The only difference is that the status ''REC UNREAD'' of a short message is not overwritten to ''REC READ''.

This command can be used only after the sms data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read commands will result in ''+CME Error: 14'' (SIM busy)

We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl- edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME has completed reading data from the SIM card.

TC63_ATC_V00.490

Page 359 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 359
Image 359
Siemens TC63 manual Atsmgr Read SMS message without setting status to REC Read, Atsmgr=?, Smgr, ATSMGR=index, See AT+CMGR