TC63 AT Command Set

13.10 AT+CNMA

s

13.10AT+CNMA New SMS message acknowledge to ME/TE, only phase 2+

Syntax

Test Command

AT+CNMA=?

Response(s)

+CNMA: (list of supported <n>s)

OK

Exec Command

AT+CNMA

Response(s)

OK ERROR +CMS ERROR

Write Command

AT+CNMA=<n>

Response(s)

OK ERROR +CMS ERROR

Reference(s)

GSM 07.05

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! ! !

Command Description

The write / execute command confirms successful receipt of a new message (SMS-DELIVER or SMS-STATUS- REPORT) routed directly to the TE. TA shall not send another +CMT or +CDS result code to TE until previous one is acknowledged. If ME does not receive acknowledgment within required time (network time-out), ME sends RP-ERROR to the network. TA shall automatically disable routing to TE by setting both <mt> and <ds> values of AT+CNMI to zero.

Parameter Description

<n>(num)

0

Parameter is only required for PDU mode. Command operates similarly as in

 

text mode

Notes

The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase 2+).

Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.

If multiplex mode is activated (AT+CMUX=0) the AT+CNMI parameter will be set to zero on all channels, if one channel fails to acknowledge an incoming message within the required time.

TC63_ATC_V00.490

Page 336 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 336
Image 336
Siemens TC63 manual At+Cnma=?, AT+CNMA=n