TC63 AT Command Set
12.3 AT+FRH s
TC63_ATC_V00.490 Page 313 of 501 5/24/05
Confidential / Draft - Do not copy
12.3 AT+FRH Receive Data Using HDLC Framing
The AT+FRH command enables the TA to receive frames using the HDLC protocol and the modulation defined
in Section 12.1, FAX parameters. An ERROR response code results if this command is issued while the modem
is on-hook.
Syntax
Note
• Used for Fax Class 1 only
Write Command
AT+FRH=<mod>
Response(s)
CONNECT
If error related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
TIA/EIA-578 ! % ! % % ! ! ! ! !