Siemens TC63 12 AT+CMEE Mobile Equipment Error Message Format, At+Cmee=?, At+Cmee?, OK Error

TC63 AT Command Set

2.12 AT+CMEE

s

2.12AT+CMEE Mobile Equipment Error Message Format

AT+CMEE controls the format of the error result codes that indicates errors related to TC63 functionality. Format can be selected between plain "ERROR" output, error numbers or verbose "+CME ERROR: <err>" and "+CMS ERROR: <err>" messages.

Possible error result codes are listed in Table 2.4, General "CME ERROR" Codes (GSM 07.07), Table 2.6, GPRS related "CME ERROR" Codes (GSM 07.07) and Table 2.8, SMS related "CMS ERROR" Codes (GSM 07.05).

In multiplex mode (refer AT+CMUX) the setting applies only to the logical channel where selected. The setting on the other channels may differ.

Syntax

Test Command

AT+CMEE=?

Response(s)

+CMEE: (list of supported<errMode>s)

OK

Read Command

AT+CMEE?

Response(s)

+CMEE: <errMode>

OK

Write Command

AT+CMEE=<errMode>

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<errMode>(num)(&W)(&V)

0(&F)(D)	Disable result code, i.e. only "ERROR" will be displayed.
1	Enable error result code with numeric values.
2	Enable error result code with verbose (string) values.

Example

To obtain enhanced error messages it is recommended to choose <errMode>=2.

AT+CMEE=2

OK

TC63_ATC_V00.490	Page 46 of 501	5/24/05
Confidential / Draft - Do not copy