Siemens TC63 manual AT+CLIP Calling line identification presentation, At+Clip=?, At+Clip?

TC63 AT Command Set

9.9 AT+CLIP

s

9.9AT+CLIP Calling line identification presentation

This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter- minated call.

Syntax

Test Command

AT+CLIP=?

Response(s)

+CLIP: (list of supported<n>s)

OK

Read Command

AT+CLIP?

Response(s)

+CLIP: <n>, <m>

OK ERROR

+CME ERROR: <err>

Write Command

AT+CLIP=<n>

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07, GSM 02.81

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

§ % % % % % % ! ! !

Unsolicited Result Codes

URC 1

Voice call response format:

+CLIP: <number>, <type>, , [, <alpha>][, <CLI validity>]

URC 2

Data/FAX call response format:

+CLIP: <number>, <type>

When CLIP is enabled at the TE (and is permitted by the calling subscriber), an unsolicited result code is returned after every RING (or +CRING: <type>) at a mobile terminating call.

Command Description

Test command returns values supported by the TA as a compound value.

Read command gives the status of <n>, and also triggers an interrogation of the provision status of the CLIP service according GSM 02.81 (given in <m>).

If no SIM card is available or SIM-Pin isn't entered, the command response is "ERROR".

Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the supplementary service CLIP in the network.

TC63_ATC_V00.490	Page 224 of 501	5/24/05
Confidential / Draft - Do not copy