Siemens TC63 manual Atsrsm Remote SIM Access Message, Atsrsm=?

TC63 AT Command Set

15.2 AT^SRSM

s

15.2AT^SRSM Remote SIM Access Message

This command is used to transfer SAP messages between devices acting as SAP server and client. It is appli- cable for XSAP data format only, for details please refer to parameter <dataForm> of command AT^SRSA. The write command transports SAP messages into an ME acting as SAP server or client.

Syntax

Test Command

AT^SRSM=?

Response(s)

OK

Write Command

AT^SRSM=<RsaDevId>, <RsaMsgId>[, <RsaMsgData>[, <RsaMsgLen>[, <RsaMsgRc>]]]

Response(s)

OK

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % ! % % % % ! % !

Unsolicited Result Code

^SRSM: <RsaDevId>, <RsaMsgId>[, <RsaMsgData>[, <RsaMsgLen>[, <RsaMsgRc>]]]

This URC is issued by an ME acting as SAP server or client to transfer SAP message data.

Parameter Description

<RsaDevId>(num)

RSA device identification

Number assigned by the host on RSA activation via AT^SRSA, parameter <devId>.

<RsaMsgId>(num)

RSA message identification

For details refer to Section 15.2.1, SAP Request Message Parameter and Section 15.2.2, SAP Response Mes- sage Parameter.

<RsaMsgData>(str)

RSA message data

For details refer to Section 15.2.1, SAP Request Message Parameter and Section 15.2.2, SAP Response Mes- sage Parameter.

<RsaMsgLen>(num)

RSA message data length

For details refer to Section 15.2.1, SAP Request Message Parameter and Section 15.2.2, SAP Response Mes- sage Parameter.

<RsaMsgRc>(num)

RSA message result code

For details refer to Section 15.2.1, SAP Request Message Parameter and Section 15.2.2, SAP Response Mes- sage Parameter.

TC63_ATC_V00.490	Page 380 of 501	5/24/05
Confidential / Draft - Do not copy