TC63 AT Command Set

13.27 AT^SSDA

s

13.27AT^SSDA Set SMS Display Availability

This command allows to notify the TC63 of its controlling application's capability to immediately display incoming SMS on a display.

If the application is able to display incoming SMS, class 0 SMS shall be displayed immediately. However, if it does not, class 0 SMS shall be treated as if no message class is determined (GSM 03.38[19]).

The effect of this command if <da>=1 is to determine the behavior of parameter <mt> of AT+CNMI:

If <da>=1 and <mt>=1 incoming class 0 SMS need to be acknowledged with AT+CNMA (see also AT+CNMI and

AT+CSMS)

If multiplex mode is enabled (AT+CMUX) and <da>=1 with <mt>=1 is set on any logical channel, all other chan- nels have to use <mt>=0.

Syntax

Test Command

AT^SSDA=?

Response(s)

^SSDA:list of supported <da>s

OK

Read Command

AT^SSDA?

Response(s)

^SSDA:<da>

OK

Write Command

AT^SSDA=<da>

Response(s)

OK

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Command Description

The read command returns ME's current capability setting.

Parameter Description

<da>(num)

Display Availability

 

0(&F)

Application is not able to display incoming SMS

1

Application is able to display incoming SMS

Note

If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with AT+CMER or AT+CNMI on another instance. Any attempt to activate settings that conflict with existing settings on another interface, will result in CME ERROR, or accordingly CMS ERROR.

TC63_ATC_V00.490

Page 361 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 361
Image 361
Siemens TC63 manual Atssda Set SMS Display Availability, Atssda=?, Atssda?, SSDAda, ATSSDA=da