Siemens TC63 manual Non-transparent data calls, At+Crlp=?, At+Crlp?, +CRLP iws, mws, T1, N2

TC63 AT Command Set

7.20 AT+CRLP

s

7.20	AT+CRLP Select radio link protocol parameters for originated
	non-transparent data calls

The AT+CRLP write command sets radio link protocol (RLP) parameters used when non-transparent data calls are originated. The read command returns the current settings for the supported RLP version 0.

Syntax

Test Command

AT+CRLP=?

Response(s)

+CRLP: (list of supported<iws>s), (list of supported<mws>s), (list of supported<T1>s), (list of supported<N2>s)

OK

Read Command

AT+CRLP?

Response(s)

+CRLP: <iws>, <mws>, <T1>, <N2>

OK

Write Command

AT+CRLP=[<iws>[, <mws>[, <T1>[, <N2>]]]]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % ! % % ! ! ! % !

Parameter Description

<iws>(num)(&W)(&V)

Interworking window size (IWF to MS) 0...61(&F)

<mws>(num)(&W)(&V)

Mobile window size (MS to IWF) 0...61(&F)

<T1>(num)(&W)(&V)

Acknowledgement timer (T1 in 10 ms units) 48...[78](&F)...255

<N2>(num)(&W)(&V)

Re-transmission attempts N2 1...6(&F)...255

TC63_ATC_V00.490	Page 163 of 501	5/24/05
Confidential / Draft - Do not copy