Siemens TC63 manual Mand can be executed. After the last packet the URC Sisw x

TC63 AT Command Set

10.2 AT^SISS

s

If "url-path" contains the IP address and has a slash '/' appended a detailed directory listing is requested.

		"type": [a)scii i)mage d)irectory]
		"size": Specifies the total amount of upload data. For each part, the trans-
		mission is triggered by the URC "^SISW: x, 1", then the AT^SISW write com-
		mand can be executed. After the last packet the URC "^SISW: x, 2"
		indicates that all data have been transferred and the FTP connection is shut
		down. Afterwards, the service can be closed with AT^SISC.
		If "size" is not given the upload procedure is the same, except that the
		AT^SISC=0 command must be executed after sending the last packet, and
		the URC "^SISW: x, 2" will appear afterwards to indicate the end of data
		transfer.
		"mode": [u)nique a)ppend d)elete]
		"u)nique" selects the FTP Store Unique command to create a file name
		unique to the current directory. If the file name is assigned by the server
		then the "^SIS" URC will appear, indicating <urcInfoId> 2100 and the
		file name.
		"d)elete" clears given 'element name'.
		If "mode" is omitted "replace mode" is default setting.
	3.	HTTP
		- HTTP client URL
		"http://'server'/'path':'tcpPort' "
		"server": FQDN or IP-address
		"path": path of file or directory
		"tcpPort": If parameter is omitted the service connects to HTTP default
		port 80.
		Refer to "IETF-RFC 2616".
	4.	SMTP
		- SMTP server address (string).
		Length: 4 ... 256.
	5.	POP3
		- POP3 server address (string).
		Length: 4 ... 256.
hcContent	Optional parameter for HTTP method "Post".
	Can be used to transfer a small amount of data. The content of this string will
	only be sent if "hcContLen" = 0. The maximum length of "hcContent" is 128
	bytes.
	To transmit a larger amount of data "hcContLen" must be set to a non-zero
	value. In this case the "hcContent" string will be ignored, and data transmission
	from the client to the server is done with AT^SISW.
hcContLen	Mandatory parameter for HTTP method "Post".
	The content length shall be set in the header of the HTTP "Post" request before
	the data part is transferred.
	If "hcContLen" = 0 then the data given in the "hcContent" string will be posted.
	If "hcContLen" > 0 then the AT^SISW command will be used to send data from
	the client to the server. In this case, "hcContLen" specifies the total amount of
	data to be sent. The data can be sent in one or several parts. For each part,
	the transmission is triggered by the URC "^SISW: x, 1", then the AT^SISW write
	command can be executed. Finally, the URC "^SISW: x, 2" indicates that all
	data have been transferred and the service can be closed with AT^SISC.
hcUsrAgent	The user agent string must be set by the application to identify the mobile. Usu-
	ally operation system and software version info is set with this browser identi-
	fier.
hcMethod	HTTP method specification: 0=GET, 1=POST, 2=HEAD.

TC63_ATC_V00.490	Page 246 of 501	5/24/05
Confidential / Draft - Do not copy