Siemens TC63 manual Suppress unsolicited result codes

TC63 AT Command Set

9.9 AT+CLIP

s

Parameter Description

<n>(num)(&W)(&V)

[0](&F)	suppress unsolicited result codes
1	display unsolicited result codes
<m>(num)(&V)
0	CLIP not provisioned
1	CLIP provisioned
2	unknown

<number>(str)

string type phone number of calling address in format specified by <type>

<type>(num)

type of address octet in integer format; 145 when dialling string includes in-ternational access code character "+", otherwise 129.

<alpha>(str)

string type alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set should be the one selected with command Select TE Character Set AT+CSCS

<CLI validity>(num)

0	CLI valid
1	CLI has been withheld by the originator.
2	CLI is not available due to interworking problems or limitations of originating
	network. <number> shall be an empty string ("") and <type> value will not be
	significant.

When CLI is not available ( <CLI validity>=2), <number> shall be an empty string ("") and <type> value will not be significant. Nevertheless, TA shall return the recommended value 128 for <type> (TON/NPI unknown in accordance with GSM 04.08 subclause 10.5.4.7).

When CLI has been withheld by the originator, (<CLI validity>=1) and the CLIP is provisioned with the "override category" option (refer GSM 02.81 and GSM 03.81), <number> and <type> is provided. Otherwise, TA shall return the same setting for <number> and <type> as if the CLI was not available.

TC63_ATC_V00.490	Page 225 of 501	5/24/05
Confidential / Draft - Do not copy