TC63 AT Command Set

18.8 AT^SAIC

s

Notes

The factory defaults of AT^SAIC vary with the selected audio mode. If AT^SNFS=1 or 4 or 5, then AT^SAIC=2,1,1.

If AT^SNFS=2 or 3 or 6, then AT^SAIC=2,2,2. AT^SNFD can be used to reset the factory defaults.

For use after restart of the ME, you are advised to store the settings of AT^SAIC and AT^SNFS to the audio profile saved with AT^SNFW. Otherwise, audio mode 1 (AT^SNFS=1) and audio interface 2 (AT^SAIC=2,1,1) will be active each time the ME is powered up.

TC63_ATC_V00.490

Page 418 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 418
Image 418
Siemens manual TC63 AT Command Set