TC63 AT Command Set

18.8 AT^SAIC

s

18.8AT^SAIC Audio Interface Configuration

AT^SAIC configures the interface connections of the active audio mode. The write command is usable in audio modes 2 to 6 only.

If AT^SNFS=1, any attempt to use AT^SAIC write command is rejected with error response. This is because all default parameters in audio mode 1 are determined for type approval and are not adjustable.

To allocate a specific audio mode to one of the audio interfaces, first select the audio mode with AT^SNFS and then choose the interface using AT^SAIC.

Syntax

Test Command

AT^SAIC=?

Response(s)

^SAIC:(list of supported <io>s), (list of supported<mic>s), (list of supported<ep>s)

OK

Read Command

AT^SAIC?

Response(s)

^SAIC: <io>, <mic>, <ep>

OK

Write Command

AT^SAIC=<io>[, <mic>[, <ep>]]

Response(s)

OK ERROR

+CME ERROR: operation not allowed

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<io>(num)(^SNFW)

 

Input and output selection

 

 

 

1

Digital input and output

 

 

2

Analog input and output

 

 

 

 

 

 

 

 

<mic>(num)(^SNFW)

 

 

 

 

Microphone selection

 

 

 

1

Microphone 1

 

 

2

Microphone 2

 

 

 

 

 

 

 

 

<ep>(num)(^SNFW)

 

 

 

 

Select differential earpiece amplifier

 

 

1

Selects the earpiece amplifier 1

 

 

2

Selects the earpiece amplifier 2

 

 

3

Selects both amplifiers. Note that both amplifiers are connected in parallel and

 

 

therefore, get the same output power if <ep>=3.

 

 

 

 

 

 

 

TC63_ATC_V00.490

Page 417 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

 

Page 417
Image 417
Siemens TC63 manual Atsaic Audio Interface Configuration, Atsaic=?, Atsaic?, Saic io, mic, ep, ATSAIC=io, mic, ep