Liebert Universal Monitor user manual Upload the Configuration File

System and Control Options

Upload the Configuration File

13.At the prompt to Initiate an Upload of Configuration File, enter Y (Yes - begin) or N (No - cancel). The current setting appears in brackets—[N] in the following example.

>INITIATE AN UPLOAD OF CONFIGURATION FILE-YES(Y) OR NO(N)? >[N]

>[

NOTE

The following instructions refer to the Microsoft Windows HyperTerminal program. These steps may vary for other communications programs.

14. At the top of the HyperTerminal window, shown below, click on Transfer, then on Send File.

Enter filename - for example, UMconfig.sav

Select Xmodem

Send button

15.In the Send File window, as shown above:

•In the Filename box, enter the full path of the file to be uploaded—for example, UMconfig.sav—or click on the Browse button to locate the file.

•In the Protocol box, select Xmodem from the drop-down list.

•Click on the Send button. (To close the window without sending the file, click on Close or Cancel.)

16.When the transfer is complete, a confirmation message—“Upload Successful”—appears in the Service Terminal Interface window and the Universal Monitor reboots with the new configuration.

73