TC63 AT Command Set

13.23 AT^SMGL

s

13.23AT^SMGL List SMS messages from preferred store without set- ting status to REC READ

Syntax

Test Command

AT^SMGL=?

Response(s)

same as AT+CMGL

Exec Command

AT^SMGL

Response(s)

^SMGL: (For default values of <stat>, see Chapter "SMS parameters.)

OK

Write Command

AT^SMGL=<stat>

Response(s)

same as AT+CMGL

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Command Description

The execute command is the same as the write command, but uses the given default of <stat>.

The write command allows to select a status type and lists, from the message storage <mem1>, all messages that currently have the specified <stat>. The major difference over the standard command AT+CMGL is that the status of the listed messages remains u n c h a n g e d (unread remains unread).

Notes

The selected <mem1> can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA- TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types. TE application can recognize the response format by examining the third response parameter.

This command can be used only after the SMS data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the sms read commands will result in ''+CME Error: 14'' (SIM busy)

We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl- edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME has completed reading data from the SIM card.

TC63_ATC_V00.490

Page 356 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 356
Image 356
Siemens TC63 manual Atsmgl=?, ATSMGL=stat