Onkyo HT-R410 Connect the speakers, Preparatory knowledge on video terminals, Do not connect

4 Connect the speakers.

If all of the speakers shown below are not available, connect at least the front right and left speakers. This makes it possible to enjoy the stereo audio.

Subwoofer

Speaker cable label

Front speakers
Right	Left			Surround	Terminals on speaker
		Center		speakers
			Right Left
		speaker

AM	FM	ANTENNA
	75

FRONT

FRONT

CENTER

SURROUND

VIDEO 3 VIDEO 2

VIDEO 1

DVD

MONITOR

SPEAKERS B

SPEAKERS A

SPEAKER

SPEAKERS

AC OUTLET

R

L

R

L

R

L

IN

OUT

IN

IN

OUT

DIGITAL INPUT S VIDEO

OPTICAL COAXIAL REMOTE

CONTROL

IN	IN	OUT	IN	IN			Do not connect
					VIDEO		the power cord
IN OUT IN IN	IN	OUT	IN	FRONT SURR	CENTER	3/8” (10 mm)	at this time.
L				L
SUBWOOFER			OPTICAL
PRE OUT

R				R
CD	TAPE	VIDEO 3 VIDEO 2	VIDEO	SUB
				WOOFER
				DVD

IN

L

SUBWOOFER

PRE OUT

R

CD

Strip 3/8” (10 mm)	Press and hold	Insert the stripped
from the end of	the lever.	end of the cable.
each cable, then		By releasing the
twist the exposed		lever, the lever is
wires tightly.		replaced.

5 Before connecting to other devices. Basic infomation about video terminals

There are 3 basic types of video signal terminals: video (composite), S-Video, and component video. The type of terminals available may vary for each component. Please check the terminals available on your components and prepare the appropriate cables before making connections. With this unit, the video signal input and output must use the some type of terminal. For example, when the DVD player has both the S-Video and video terminals and the TV has only the video terminal, the two units should be connected using the video terminals.

The video terminal (composite video) uses a standard video jack found in many video components such as TV and VCR. The connection to this terminal uses an RCA type connection cable equipped with RCA type pin plugs.

The S-Video terminal can transmit video with higher quality than the composite video terminal. The connection to this terminal uses a S-Video cable.

In addition, although not used in this unit, the component video terminals are use in some TV featuring high video quality. These terminals output the video luminance and chrominance signals separately for faithful reproduction of original colors.

Video cable

S video cable

VIDEO OUT

S VIDEO OUT

Preparatory knowledge on video terminals

Audio signal terminals include those for digital audio and those for analog audio.

The digital audio terminals are compatible with multiple channels and can transmit audio with higher quality than analog audio terminals. The digital audio terminals include Optical and Coaxial terminals but their audio quality is identical. The Digital Optical terminals should be connected using an optical fiber cable while the Digital Coaxial terminals should be connected using a coaxial cable (RCA type).

The analog terminals (L/R) should be connected using an audio connection cable (RCA type).

The analog multichannel terminals are found in DVD players with DVD audio compatibility. This unit uses an analog multichannel terminal as the DVD terminal. The connection of this terminal should use an audio connection cable (RCA type).

Optical fiber cable

Coaxial cable

Audio connection cable

Audio connection cable

DIGITAL OUT

OPTICAL

DIGITAL OUT

COAXIAL

FRONT

R L

FRONT SURR CENTER

L

R

SUB

WOOFER

SN 29343470 W0302-1