RCA RT2250R Fine Setting of the Speakers, The TEST/ SET UP button, Speaker Configurations

Models: RT2250 RT2280 RT2250R

1 31
Download 31 pages 21.91 Kb
Page 23
Image 23
Fine Setting of the Speakers

Advanced Sound Control

Fine Setting of the Speakers

This receiver supports a wide range of speakers and subwoofers. For optimal surround sound enjoyment, you need to register the speaker selection settings of your audio system. If you buy this receiver with accompanied speaker package, then this step has been done for you.

Also, to make the surround sound more effective and suit the acoustic conditions in your listening room, you need to delay the signal from some of the speak- ers. Such channel delay compensates for center or surround speakers that are closer to listening position than the front speakers. You can make use of the TEST/ SET UP button to adjust the speakers’ relative loudness.

The TEST/ SET UP button

You can adjust the relative loudness of the individual speakers by TEST/ SET UP button. In Dolby modes, press the button briefly. A short noise will be heard in the speakers one by one. The speaker having the noise at that moment will be shown in the display. You can listen to that speaker and rotate the MULTI JOG to adjust the level.

Advanced Setting

Factory defaulted Advance setting indication from VFD

The receiver has defaulted the following distances:

Front

 

 

 

Front

 

Center

 

Left

 

 

Left

 

 

 

C ch

L/RThe TEST/ SET UP buttonL/R

Speaker Configurations

You can also change the setup of the speakers by pressing the TEST/ SET UP button until the display EN shows L/R SML or L/R LRG which enables you to set

the size of the front speaker. Available Selections:

Front Speaker selection

Large/ Small

Center Speaker selection

Large/ Small/ None

Surround Speaker selection

Large/ Small/ None

Subwoofer selection

Yes/ No

Subwoofer Phase

+ / -

Front Speaker distance

0-40 ft

Centre Speaker distance

0-40 ft

Rear Speaker distance

0-40 ft

 

 

Pressing TEST/SETUP repeatedly while the display is still showing L/R LRG (about 5 seconds), the display will toggle among: front, center, surround, sub- woofer, subwoofer phase and speakers’ distance setup. Set the speaker size or speakers’ distance by rotating the MULTI JOG.

NOTE

The sub-woofer selection will always be YES when the main speakers are set to small (SML).

For the subwoofer phase setting, it will be affected by how you locate the subwoofer. Try both + and - settings and select the one that has better bass effect.

If your unit comes with speakers (RT2280/2250), always set all speakers size to “small” to protect them and optimize the sound quality.

SUR

Rear

Left

SUR

Rear

Left

Front speakers (L/R)

15 ft

Center speaker (Cch)

15 ft

Rear speaker (SUR)

10 ft

21

Page 23
Image 23
RCA RT2250R Fine Setting of the Speakers, The TEST/ SET UP button, Speaker Configurations, Advanced Sound Control