RCA RT2250R, RT2280 Operating your Receiver, Using the receiver to play a source, Hint

NOTE

Once your remote is encoded, you can press ON/OFF on the remote once to turn off the component and then followed by the second time quickly to turn off the receiver (i.e. this unit). If you only want the receiver to be turned off, select FM/ AM while the unit is ON before pressing ON/OFF.

HINT

This remote may not operate all models of the brands shown.

If batteries are removed from the battery compartment of the remote control, all mem- ory will be lost. You need to re-enter all previously programmed codes again.

The buttons on the remote may not work correspondingly with those on other brand components. Experiment with the remote and your components to see which buttons work. If only a few functions operate, check to see if another code set will work with more but- tons.

Operating your Receiver

Using the receiver to play a source

EN

After having properly connected a source (DVD, CD, VCR) to the receiver, you can partly control them through the receiver.

Playing a DVD with the receiver

1.Connect a DVD player to the receiver (see connect- ing your receiver for details)

NOTE

To play Dolby Digital sound, the source must be connected to the receiver via the optical or coaxial terminal (see "Digital Connection” on page 5 for details)

2.Press STANDBY/ON to switch on the receiver

3.Select the DVD source by pressing the DVD source button

VCR1 ON OFF TV

6 CH.IN

DVD•6 CH VCR2 AM•FM SAT•CABLE

e Amplifier

CDTAPE

CH +

HOME THEATER AV SURROUND RECEIVER RT2280

4.Switch ON the DVD player and start playback

5.Switch ON your TV

6.Select the appropriate A/V channel on the TV (refer to your TV manual for details) until the image from the DVD player is displayed

7.Set the sound Mode if needed (see "Advanced sound control" for details)

Example 1:

To play 5.1 Dolby Digital surround sound

Press SURR. MODE button until "Dolby Digital" appears on the Display and all of the speakers’ icons light up.

Example 2:

DVD: You may also need to select the Dolby Digital

5.1on the DVD disc menu to have the digital sur- round enabled providing that the disc is encoded with Dolby Digital 5.1 (please refer to the DVD

player and DVD disc instruction)

15