Advance Sound Control
Use a subwoofer to enjoy optimum sound.
•Subwoofer Phase: Try both settings and select the sound preferred.
•Speaker distance: For optimum surround experi- ence measure the distance between the speaker and your favorite listening position.
1. Press and hold TEST/SET UP for 3 seconds
6 CH.IN
FUNCT
D RECEIVER RT2280
2.While the VFD display is showing L/R SML, rotate MULTI JOG to select and release to save setting.
Speaker Icons
The receiver shows you the speakers’ types and set- tings on the display with the following icons:
Small Front Speakers
Large Front Speakers
CSmall Center Speakers
CLarge Center Speakers
| Small Rear Speakers |
| Large Rear Speakers |
LFE | Subwoofer Present |
Displaying Program Formats
When a digital source is playing, the receiver will automatically switch to the proper surround mode and indicates on the speaker icons on the
FUNCTION
C
3.Press TEST/SETUP once to move to the next speaker setting.
6 CH.IN
FUNCT
D RECEIVER RT2280
4. Repeat step 3 to set up the next speaker
6.When set up is done, wait for 5 seconds to auto- matically save your settings or press any source key to save your selection and set up mode.
6 CH.IN |
| VCR1 | ON OFF | TV |
|
|
|
|
|
DVD•6 CH VCR2 AM•FM SAT•CABLE
E THEATER AV SURROUND RECEIVER RT2280 | CD | CH + | TAPE |
|
| ||
|
|
| |
|
|
|
|
LFE
It is important to note, however, that not all Dolby Digital sources are encoded with the full complement of five channels plus LFE*. Speaker icons show how many and which speaker you have enabled (See “Fine Setting of the Speakers”) and the letters inside the speaker icons show which channel is present in the source information. For example, the diagram shown means you have all the five speakers and subwoofer enabled and the digital sources you played have five channels plus LFE complemented.
*LFE stands for Low Frequency Effect. The indication “LFE” appears if the digital source contains LFE infor- mation. In this case, the bass signal will be delivered to the subwoofer, offering more dynamic deep bass sound effects. If the letter is flashing, the signal is either too weak or just gone.
22