Manuals / Paradyne / Computer Equipment / Network Router

Paradyne Hotwire 7984 manual Creating a Login, Procedure

Models: Hotwire 7984

1 122

Download 122 pages 48.4 Kb

Page 74

Creating a Login

Security

Access level is also used to control access via Telnet. If the Telnet Session

Access Level is set to Administrator (see Table A-5,Telnet Session Options), a

Login ID with an Operator access level is not permitted access.

Creating a Login

Logins apply to the terminal directory connected to the communication port or

Telnet access directly to the ATI of the 7984 Standalone Termination Unit.

Six login ID/password combinations are available. Each Login ID and Password must be unique and include an access level.

"Procedure

1.To create a login record, follow this menu selection sequence: Main Menu → Control → Administer Logins

main/control/admin_logins		Hotwire
		Model: 7984
ADMINISTER LOGINS		Page 1 of x
Login ID:	newuser
Access Level:	Administrator

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

ESC for previous menu	MainMenu	Exit
Save	New	Del

2. Select New and press Enter. The Login Entry screen is displayed.

main/control/admin_loginss/entry				Hotwire
				Model: 7984
LOGIN ENTRY
Login ID:	newuser2
Password:	es342
Re-enter Password: es342

Access Level:	Administrator

WARNING

New logins will not become permanent until saved through the ªADMINISTER LOGINSº screen!

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

7-2

February 1999

7984-A2-GB20-10

Image 74

Paradyne Hotwire 7984 manual Creating a Login, Procedure

Contents

USERS GUIDE HOTWIRE M/HDSL STANDALONE TERMINATION UNITWITH DSX-1 INTERFACE Document No. 7984-A2-GB20-10Printed in U.S.A Warranty, Sales, and Service InformationCopyright E 1999 Paradyne Corporation All rights reserved TrademarksImportant Safety Instructions EMI Warnings To Users of Digital Apparatus in Canada2 Using the Asynchronous Terminal Interface Contents1 About the Hotwire 7984 Standalone Termination Unit About This GuideContents Initial Startup and ConfigurationMonitoring the Unit 7 Security 5 Testing6 Messages and Troubleshooting 8 IP AddressingB Standards Compliance for SNMP Traps A Configuration Option TablesD Technical Specifications Glossary Index C Cables and Pin Assignmentsinstructions for accessing the user interface and navigating 7984 Termination Units features and capabilitiesUsing the Asynchronous Terminal Interface. Provides Initial Startup and Configuration. Provides procedures forCables and Pin Assignments. Contains connector and Configuration Option Tables. Contains all configurationoptions, default settings, and possible settings Technical Specifications. Contains physical and regulatoryM/HDSL Overview About the Hotwire Standalone Termination UnitHotwire 7984 Termination Unit Features H Local Management standalone unit. Provides local management using a Network Configuration Figure 1-1. Sample M/HDSL ConfigurationsFigure 1-3. Hotwire 7984 Standalone Termination Unit Rear Panel Front Panel LED Status IndicatorsFigure 1-2. Hotwire 7984 Standalone Termination Unit Front Panel Rear Panel Interface ConnectionsManagement Information Base MIB Support Figure 1-4. HDSL SNMP ConfigurationSNMP Management Capabilities SNMP Trap SupportAbout the Hotwire 7984 Standalone Termination Unit FebruaryCommunication Port Settings Using the Asynchronous Terminal InterfaceUser Interface Access Initiating an ATI Session Select Using the Asynchronous Terminal Interface Interface Options Main Menu → Configuration → Load Configuration From → NetworkScreen Work Areas Keyboard Keys ProcedureNavigating the Screens PressAnd press Enter to Screen Function KeysFor the screen function SelectProcedure Switching Between Screen Work AreasExample Ending an ATI Session ProcedureFebruary 2-10Using the Asynchronous Terminal Interface Initial Startup and Configuration Overview+24 Vdc Power Supply Pinouts Connecting Power to the UnitConnecting the Unit to an Optional External +24 Vdc Power Source ProcedureProcedure Connecting to the NetworkConnecting to a System Terminal ProcedureEntering Identity Information Main Menu → Control → ChangeProcedure H Referring to Appendix A, Configuration Option Tables Choosing a Configuration ModeConfiguring the Unit Using the Configuration Menus Configuration Option AreaProcedure Configuring the Unit Using the Internal SwitchesHANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES 98-16073a Switchpack LocationsSwitchpack S1 & S2 Switch # Switchpack DefinitionsTable 3-1. Switchpack S1 Definitions Allows you toSwitch Position Table 3-2. Switchpack S2 DefinitionsTable 3-3. DSL Line Rate, Switches 3±5 on Switchpack S2 3-103-11 Accessing and Displaying Configuration OptionsMain Menu → Configuration Load Configuration From If you selectMain Menu → Configuration → Default Factory Configuration Edit/DisplayMain Menu → Configuration → Current Configuration To Access the3-13 Configuration LoaderMain Menu → Configuration → Configuration Loader Procedure3-14 Completed successfullyProcedure Saving Configuration Options3-15 If you selectMain Menu → Control → Download Code Download Code3-16 ProcedureMonitoring the Unit What to MonitorViewing System and Test Status Main Menu → Status → System and Test StatusMessage Health and StatusTable 4-1. Health and Status Messages 1 of What Message IndicatesWhat Message Indicates Table 4-1. Health and Status Messages 2 ofMessage What To DoCall your service Self-Test ResultsTable 4-2. Self-Test Results Messages MessageTest Status Message Test StatusTable 4-3. Test Status Messages MeaningH SES Severely Errored Seconds Seconds during which more than Viewing Network Error StatisticsMain Menu → Status → Performance → Network Error Statistics Contains Viewing Network Performance StatisticsThis Field Main Menu → Status → Performance → Network Performance StatisticsThis Field ContainsMain Menu → Status → Performance → DSX-1 Performance Statistics Viewing DSX-1 Performance Statistics4-10 Contains 4-11This Field Main Menu → Status → Display LEDs Viewing 7984 Standalone Termination Unit LEDs4-12 Type 7984 Standalone Termination Unit LEDs4-13 LED isFebruary 4-14Monitoring the Unit Main Menu → TestingAccessing the Test Menu SelectRunning Network Tests Main Menu → Test → Network & DSX TestsLine Loopback ProcedureT1 to V.35 Repeater Loopback Repeater LoopbackT1 to T1 Repeater Loopback ProcedureDTE Loopback ProcedureSend Remote Line Loopback ProcedureSend and Monitor ProcedureMain Menu → Test → Device Tests Device TestsLamp Test ProcedureTelco-Initiated Line Loopback Ending an Active TestTelco-Initiated Tests Activation and Deactivation5-10 Telco-Initiated Payload LoopbackTelco-Initiated Remote Line Loopback Overview Messages and TroubleshootingH Configuring SNMP Traps H Device Messages H Troubleshooting Management and Communication Options → SNMP Traps Options Configuring SNMP TrapsMain Menu → Configuration → Load Configuration From → Device Message Device MessagesTable 6-1. Device Messages 1 of What Message IndicatesDevice Message Table 6-1. Device Messages 2 ofMessages and Troubleshooting What Message IndicatesSymptom TroubleshootingTable 6-2. Troubleshooting 1 of SolutionsSymptom Table 6-2. Troubleshooting 2 ofMessages and Troubleshooting SolutionsATI Access to Menu Functions ATI Access LevelsTable 7-1. Access Levels AdministratorCreating a Login ProcedureOn the Login Entry screen, for the EnterAssigning SNMP Community Names and Access Types Deleting a LoginControlling SNMP Access Main Menu → Configuration → Load Configuration From → Edit →Main Menu → Configuration → Management → Security Menu Resetting the Termination Units COM Port or Factory DefaultsLimiting SNMP Access through the IP Addresses of the Managers ProcedureIf entering yes to prompt ThenIP Addressing Selecting an IP Addressing SchemeIP Addressing Example Peer IP Address AssignmentsTo Access the Configuration Option TablesConfiguration Options in Chapter 3, Initial Startup and Configuration To Configure theTable A-1. Network Interface Options 1 of Main Menu → Configuration → Current Configuration →Network Interface Options Menu Excessive Error Rate ThresholdPossible Settings 000.000.000.001 ± 223.255.255.255, Clear Table A-1. Network Interface Options 2 ofDSL Line Rate Possible Settings 400, 528, 784, 1040 Peer IP Address LTU OnlyMain Menu → Configuration → Load Configuration From → DSX-1 Interface OptionsTable A-2. DSX-1 Interface Options 1 of Port StatusLine Equalization Table A-2. DSX-1 Interface Options 2 ofLine Coding Format Send AIS on Network FailureMain Menu → Configuration → Load Configuration From → System Options MenuTable A-3. System Options 1 of Test TimeoutRemote Telco Loopback Table A-3. System Options 2 ofTelco Initiated Loopback Port Main Menu → Configuration → Load Configuration From → CommunicationCommunication Port Table A-4. Communication Port Options 1 ofCharacter Length Terminal Use Only Table A-4. Communication Port Options 2 ofData Rate Possible Settings 9.6, 14.4, 19.2, 28.8 Parity Terminal Use OnlyLogin Required Terminal Use Only A-10Table A-4. Communication Port Options 3 of Port Access Level Terminal Use OnlyA-11 Management and Communication Options MenuTelnet Session Options Management and Communication → TelnetTelnet Login Required A-12Table A-5. Telnet Session Options Session Access LevelManagement and Communication → Comm Protocol Options Communication Protocol OptionsA-13 Main Menu → Configuration → Load Configuration From →Node IP Address Possible Settings 000.000.000.000 ± A-14Table A-6. Communication Protocol Options 1 of Node Subnet Mask Possible Settings 000.000.000.000 ±Communication Port Subnet Mask Possible Settings 000.000.000.000 ± A-15Table A-6. Communication Protocol Options 2 of Communication Port Link ProtocolManagement and Communication → SNMP → General SNMP Management General SNMP Management OptionsA-16 Table A-7. General SNMP Management Options 1 ofName 1 Access A-17Table A-7. General SNMP Management Options 2 of Community Name Possible Settings ASCII text field, PublicManagement and Communication → SNMP → Security SNMP NMS Security OptionsA-18 Table A-8. SNMP NMS Security Options 1 ofPossible Settings 000.000.000.000 ± 223.255.255.255, Clear A-19Table A-8. SNMP NMS Security Options 2 of Access LevelManagement and Communication → SNMP Traps SNMP Traps OptionsA-20 Table A-9. SNMP Traps Options 1 ofPossible Settings 000.000.000.000 ± 223.255.255.255, Clear A-21Table A-9. SNMP Traps Options 2 of General Traps Possible Settings Disable, Warm, AuthFail, BothLink Traps Possible Settings Disable, Up, Down, Both A-22Table A-9. SNMP Traps Options 3 of Link Trap InterfacesSNMP Traps authenticationFailureStandards Compliance for SNMP Traps warmStartlinkUp and linkDown linkUp/Down Variable-BindingsDescription Enterprise-Specific TrapsSNMP Trap Possible CauseVariable-Bindings InterfaceenterpriseTestStart/Stop Possible CauseCables and Pin Assignments H COM Port Interface Cable H Power Input ConnectorH Optional Power Cable H T1 Network Interface Cable H DSL Network Interface CableT1 Network Interface Table C-1. T1 100-Ohm Balanced Interface ConnectorSignal Pin NumberSignal Table C-2. DSL Network Interface ConnectorDSL Network Interface Cable Pin NumberFigure C-3. COM Port-to-PC Cable Feature Number 7900-F1-507 COM Port Interface CableSignal Table C-3. COM Port Connector J6Direction Pin NumberTable C-4. DC Power Connector Power Input ConnectorOptional Power Cable DC Power Cable Feature Number 7900-F1-506Criteria Technical SpecificationsSpecifications WeightTechnical Specifications bridged tap GlossaryGL-1 COM portDSLAM factory defaultsGL-2 DTLBHDSL resetGL-3 IP addressTCP/IP GL-4SNMP TelnetIndex IN-1IN-2 IN-3 IN-4