Paradyne Hotwire 7984 Configuration Edit/Display, Main Menu → Configuration → Default Factory

Initial Startup and Configuration

Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current, customer, or default configuration is loaded. To access the Configuration Edit/Display screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration

± or ±

Main Menu → Configuration → Default Factory

main/config/edit	Hotwire
	Model: 7984

CONFIGURATION EDIT/DISPLAY

Network

DSX-1

System Options

Communication Port

Management and Communication

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

See Appendix A, Configuration Option Tables, for a list and explanation of the configuration options available.

Select . . .	To Access the . . .	To Configure the . . .
Network	Network Interface Options, Table A-1	DSL network interface on
		the unit.
DSX-1	DSX-1 Interface Options, Table A-2	DSX interface.
System	System Options, Table A-3	General system options of
Options		the unit.
Communication	Communication Port Options, Table A-4	Unit's COM port options.
Port
Management	H Telnet Session Options, Table A-5	Management support of the
and	H Communication Protocol Options,	unit through SNMP and
Communication		Telnet.
	Table A-6
	H General SNMP Management
	Options, Table A-7
	H SNMP NMS Security Options,
	Table A-8
	H SNMP Traps Options, Table A-9

3-12 February 1999 7984-A2-GB20-10