IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.

In the IPv6 network environment, follow the next procedure to use the IPv6 address.

From the SyncThru™ Web Service

Activating IPv6

1Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and

press the Enter key or click Go.

2If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password.

We recommend you to change the default password for security reasons.

ID: admin

Password: sec00000

3When the SyncThru™ Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network

Settings.

4Click TCP/IPv6 on the left pane of the website.

5Check the IPv6 Protocol check box to activate IPv6.

6Click the Apply button.

7Turn the machine off and turn it on again.

• You can also set the DHCPv6.

To manually set the IPv6 address:

Check the Manual Address check box. Then, the Address/Prefix text box is activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F).

2. Using a Network-connected Machine 91

Page 91
Image 91
Samsung M202x IPv6 configuration, Activating IPv6, From the SyncThru Web Service, ID admin Password sec00000, Settings