Connecting the
Figure 17: Connecting a FortiGate-5140 PEM to a FortiGate-5053 power converter tray
RTN(RED)
RTN
RTN
V+
V+
(RTN)
(RED)
V- 
V- | ||
| ||
(BLACK) | - | |
| 48V |
AC in
Red RTN to | Black |
to | |
RTN (RED) |
| RETURN |
| |||||
4 | 3 | 2 | 1 | 4 | 3 | 2 | 1 |
4 | 3 | 2 | 1 | 4 | 3 | 2 | 1 |
PEM |
|
|
|
|
|
|
|
|
| RTN (positive) | |||||
terminal strip |
| terminal strip | |||||
connectors |
|
|
| connectors | |||
1, 2, 3, 4 |
|
|
| 1, 2, 3, 4 | |||
TERMINAL BLOCK COVER
Remove terminal block cover and decable before removing PEM.
1Attach the ESD wrist strap to your wrist and to an ESD socket or to a bare metal surface on the chassis or frame.
2Loosen the screws and remove the terminal block cover from the
3If required, loosen the screws and remove the clear plastic cover from the back of the
4Connect the DC power wires (see Figure 17):
•Connect 4 black DC power wires to the
•Connect these black wires to connectors 1, 2, 3, and 4 on the
•Connect 4 red return wires to the
•Connect these red wires to connectors 1, 2, 3, and 4 on the
5Secure the power wires to the
6If required, label the black wires
7If required, label the red wires RTN.
8
9Attach the clear plastic cover to the back of the
FortiGate-5140-R Chassis Guide
2601-30000-87705-20090108http://docs.fortinet.com/ • Feedback
