Technicolor - Thomson SpeedTouchTM620 manual 119

Chapter 9

The Integrated SpeedTouch™ ISDN Modem

Step Action

8Click Other.

Result: the Other page appears:

9Select the Mode (On-Demandor Always On)

10Fill in the idle time limit. If the connection is On-Demand, and the connection is idle for this amount of time (i.e. no traffic), the connection shuts down.

The other values are automatically retrieved when the PPP connection is established

.

You cannot enable Callback via the Web interface. For this, you must use CLI. If you do not enable it, the SpeedTouch™ will establish the ISDN connection over which the PPP connection is made.

Via CLI Use the following command sequence to configure the ISDN dial-in connection via CLI:

[isdn]=>ifconfig	number	mlppp
intf
BODstart	BODend	mode
callback	group
[isdn]=>ifconfig
intf = buisdn
[number] = 025292222
[mlppp] =	enabled
disabled
[mlppp] = disabled
[BODstart] = 40
[BODend] = 38
[mode] = dialout
[callback] =	enabled
disabled
[callback] = disabled

[group] = empty

:isdn ifconfig intf=buisdn mlppp=disabled callback=disabled [isdn]=>:isdn ifconfig intf=buisdn mlppp=disabled callback=enabled [isdn]=>saveall

[isdn]=>:ppp

[ppp]=>ifattach intf bu_isdn [ppp]=>

[ppp]=>

E-DOC-CTC-20051017-0155 v1.0 119