Technicolor - Thomson SpeedTouchTM620 manual 198

Chapter 12

SLA Monitoring.

Now that we defined an SLA ping test we need to configure the test. The following parameters can be configured:

Parameter	Description	Values
test	The name of the traceroute	string
	test to configure.
addr	The destination IP address.	string
size	The size of the data portion to	number{0-20000}
	be transmitted in a traceroute
	request.
timeout	The timeout value, in seconds,	number{1-60}
	for a traceroute request
probePerHop	The number of times to	number{1-10}
	reissue a traceroute request
	with the same time-to-live
	value .
port	The UDP destination port	number{1-65535}
	number to send to.
maxTtl	The upper limit on the number	number{1-255}
	of routers through which a
	packet can pass.
initTtl	The initial time-to-live value.	number{0-255}
createHopEntries	Enables creation of traceroute	disabled or enabled
	hop table.
frequency	The number of seconds to wait	number{0-65535}
	before repeating a traceroute
	test.
maxrow	The max number of entries in	number{0-100}
	the history table.
storagetype	The storage type of this entry.	volatile or
		nonVolatile
trap	The value determines when	[+/-]flag[+/-
	and if to generate a	flag...]{pathChange
	notification.	testFailure
		testCompletion}
type	The implementation method to	IcmpEcho ro
	be used for the traceroute test.	UdpEcho
descr	The descriptive name of the	quoted string
	traceroute test.
srcaddr	Ip source address to be used.	ip-address
intf	Interface name.	none, loop, ipsec0,
		Internet, lan1,
		wan1, dmz1, guest1

198 E-DOC-CTC-20051017-0155 v1.0