Technicolor - Thomson SpeedTouchTM620 manual Parameter Description Values

Chapter 12

SLA Monitoring.

Now that we defined an SLA ping test we need to configure the test. The following parameters can be configured:

Parameter	Description	Values
test	The name of the ping test to	string
	configure.
addr	The destination IP address.	string
size	The size of the data portion to	number{0-20000}
	be transmitted in a ping probe.
timeout	The timeout value, in seconds,	number{1-60}
	for a ping operation
count	The number of times to send a	number{1-15}
	ping probe.
datafill	The data fill pattern of a probe	quoted string
	packet.
frequency	The number of seconds to wait	number{0-65535}
	before repeating a ping test.
maxrow	The max number of entries in	number{0-50}
	the history table.
storagetype	The storage type of this entry.	volatile or
		nonVolatile
trap	The value determines when	[+/-]flag[+/-flag...]
	and if to generate a	probeFailure
	notification.	testFailure
		testCompletion
trapprobefilter	The number of successive	number{0-15}
	probe failures before initiating
	a pingProbeFailed notification.
traptestfilter	The number of ping failures	number{0-15}
	within one test before initiating
	a pingTestFailed notification.
type	The implementation method to	IcmpEcho or
	be used for the ping test.	UdpEcho
descr	The descriptive name of the	quoted string
	ping test.
srcaddr	Ip source address to be used.	ip-address
intf	Interface name.	noneloopipsec0In
		ternetlan1wan1d
		mz1guest1
bypassrt	Bypass the normal routing	disabled or enabled
	tables.
dsfield	The value to store in the	number{0-255}
	Differentiated Service Field in
	the IP packet

194 E-DOC-CTC-20051017-0155 v1.0