Technicolor - Thomson SpeedTouchTM620 SpeedTouch CLI dyndns commands, Dyndns host, Dyndns service

The SpeedTouch™ CLI dyndns commands

Chapter 6

SpeedTouch™ System Services

The SpeedTouch™ allows configuration of its dynamic DNS client functionality via the :dyndns CLI command group:

=>:dyndns help		are available :
Following commands
add	: Add a Dynamic DNS client.
modify	: Modify a Dynamic DNS client.
delete	: Delete a Dynamic DNS client.
flush	: Delete all Dynamic DNS clients.
list	: List all Dynamic DNS clients.
Following command groups are available :
host	service
=>

In this command group all commands are available for adding/deleting and configuring a dynamic DNS client.

It contains also two sub command groups:

:dyndns host

=>:dyndns host help		are available	:
Following commands
add	:	Add a fully qualified host name
delete	:	Delete a host	name
flush	:	Delete all host names
list	:	List all host	names

=>

This allows to specify one or more host name(s) corresponding to a dynamic DNS client.

:dyndns service

[dyndns]=>:dyndns service			help
Following commands		are available :
modify	:	Modify	specific	DynDNS service settings
list	:	List all DynDNS		services

=>

This allows you to view/configure the pre-configured dynamic DNS service providers, or to create custom dynamic DNS service providers.

For a full description of the syntax of these commands, see the “SpeedTouch™ CLI Reference Guide”.

E-DOC-CTC-20051017-0155 v1.0 51