Technicolor - Thomson SpeedTouchTM620 manual Sntp list, Sntp add and sntp delete, Sntp config

Chapter 6

SpeedTouch™ System Services

Setting the time via CLI The :system rtc settime CLI command allows you to overview the current real-time clock settings and to configure them:

=>:system rtc settime date = 04/07/2003 time = 10:34:55 timezone = +01:00 daylightsaving = off =>

You can also use this CLI command to manually set the SpeedTouch™ internal real- time clock:

=>:help system rtc settime

Set/Get date, time, timezone, daylight savings time Syntax : settime [date = <dd/mm/yyyy>] [time = <hh:mm:ss>]

[timezone = <(+ or -)hh:mm>] [daylightsaving = <{disabledenabled}>]

Parameters :

[date = <dd/mm/yyyy>] Set the system date

[time = <hh:mm:ss>] Set the system time

[timezone = <(+ or -)hh:mm>]

Set the system timezone(-12:00...+14:00 / 15 minute resolution) [daylightsaving = <{disabledenabled}>]

Enable/Disable daylight saving

SNTP via the CLI The SpeedTouch™ SNTP client is configured via the :sntp CLI command group:

=>:sntp help		are available :
Following commands
add	:	Add NTP server
list	:	List the NTP servers
delete	:	Delete NTP server from list
flush	:	Flush NTP server list and SNTP client configuration
config	:	Modify/Display configuration

You can use the following commands:

:sntp list

List the configured NTP servers.

:sntp add and :sntp delete

Add or delete NTP servers.

:sntp config

Enable/disable the SpeedTouch™ SNTP client and set the polling interval.

E-DOC-CTC-20051017-0155 v1.0 59